|
|
| |
 |
| |
- Comprehensive Array of Input/Output Terminals
for Immediate Connectivity
- DVI Input Support
- Long Life Lamp: 4000 hours (with optional
MT60LPS Extended Life Lamp)
- Quietness: Less than 29 dB (with optional
MT60LPS Extended Life Lamp)
- Short Focus: Throwing distances are 100
inches at 3m and 60 inches at 1.8m. (Zoom
ratio = 1.35)
|
|
![]() |
| |
| With the innovative built-in image sensor, the
first of its kind in the industry *1,
Auto Focus and the Auto Wall Colour Correction*2
have been realized. |
Introduction of the 2-D image
sensor enables the Auto Focus and the Auto Wall
Colour Correction to automatically adjust the
focus and colour tone of projected images with
just the press of a button. Images are bright
and clearly focused even when projected on a
lightly coloured wall.The Auto Focus projects
a focus pattern on the screen at first, then
automatically adjusts the focus by capturing
the image with the image sensor, turning the
focus lens, and judging the point when the edge
of the pattern image is most clear.Auto Wall
Colour Correction is a technology for correcting
W (White), R (Red), G (Green) and B (Blue) by
using a new colour correction application technology
unique to NEC and the image sensor. This will
first project a test pattern in W (White), R
(Red), G (Green) and B (Blue), and then the
respective colour conditions will be detected
with the image sensor. This reproduces the colours
as close as possible to the original colour
by detecting differences in the projected colour
and the original colour, and then making the
reverse correction.
|
 |
* 1: As of September
2002 (Researched by us)
* 2: This function is available for projection
sizes of 40" to 150". Depending on the room
brightness or screen conditions, proper performance
may not be obtained. |
|
| The 3D Reform for projecting from an angled position
and the Auto 3D Reform automatically correct
images. |
 |
With the
newly developed chip from NEC, the 3D Reform
function corrects 3D distortions not obtainable
with ordinary four direction trapezoid correction
(top and bottom, right and left) and is capable
of projecting more vivid images. When a distorted
image is projected, make the correction simply
by setting the four corners. *1 Since it is
possible to project from a position of projection
angles up to 40 degrees vertically and 34 degrees
horizontally, you can install the projector
anywhere it does not obstruct your presentation,
in contrast with ordinary projectors that had
to be installed in front of the screen. Flexibility
of projector position is dramatically expanded.
Furthermore, the MT1065J can zoom while maintaining
the corrected image, and then with the Auto
3D Reform image sensor senses (recognizes) *3
the screen shape and automatically corrects
the image to fit the screen. *4 |
*1
Since it is an electrical correction, the brightness
or image quality may be deteriorated.
*2 As a result of reviewing the measuring method,
the correctable angle can be changed.
*3 For actual operation, there are some restrictions
such as using a screen with a frame, etc.
*4 If the firmware version is Ver.1.09 or later,the
projector is equipped with the Auto 3D Reform.
In case that the firmware version is earlier
than Ver.1.09, to use the Auto 3D Reform, you
need to download the update file from the download
page and install the firmware upgrade.
The method
to confirm the version of the MT1060/1065 firmware
Download MT1060/1065
Update Software |
|
| This supports wireless and wired LAN. The lamp
lifetime and error messages will be reported
through e-mails. |
 |
LAN connections (wireless/wired)
are possible between multiple PC's and the projector
by using the optional wireless LAN card or a
wired LAN card commercially available. Since
conference participants can transfer data from
their own PC's and it can be projected directly
without cables, you can proceed with conferences
without interruption to discussions. It is also
possible to use multiple projectors simultaneously
to project images in a large venue. With the
newly developed technology by NEC, high quality
images on a PC screen can be transferred efficiently
and quickly. By using the Dynamic Image Utility,
collectively monitor and control the projector's
state (confirmation of the time duration for
using the lamp, ON/OFF of the power, input signal
switching etc.) from your desktop PC through
the network, as well as transferring and displaying
image files. Furthermore, receive notifications
of lamp lifetime or error messages to the e-mail
address set previously. |
|
| By using the long-life lamp (optional), the lamp
lifetime has a maximum of 4000 hours and generates
low noise at a level of only 29 dB. |
| In the
power saving Lamp Eco mode, lamp lifetime can
be extended up to 3000 hours. With the long-life
lamp for the MT60LPS, lamp lifetime can be extended
up to a maximum of 4000 hours. With these features,
you can drastically save costs and labour for
replacing lamps. Furthermore, by introducing
our unique separate cooling method and large
exhaust fan, low noise operation at a level
of 29 dB has been achieved when the long-life
lamp is used. (34 dB for the Lamp Eco mode,
and 39 dB for Normal mode). You can enjoy images
projected on a large sized screen under very
quiet circumstances. |
|
| The throwing distance has been shortened by introducing
the short focus lens |
| With the
short focus lens, it is possible to project
images on a large-sized screen with a short
throwing distance. (It is possible to project
images on a screen of 100" with a throwing distance
of 3 m.) Project an impressive image even when
installing the projector in a classroom, conference
room, or small meeting room. |
|
| Three types of security functions, Prevention
of improper operations, Prevention of settings
changes, and Prevention of illegal use are provided. |
| In order
to prevent unauthorized persons from operating
the projector, the Control Panel Key Lock function
disables buttons on the main unit and operates
only with the remote control. For instance,
it can prevent improper operations by students
when used in a classroom. It is also possible
to keep unauthorized persons from changing the
settings (the menu and the background logo data)
of the projector by using a password. Furthermore,
it is also possible to prohibit anyone from
operating the projector without authorization
by providing an authentication setting with
a registered PC card. This is effective for
preventing theft. |
|
| With the Viewer function using a PC card, you
can make a presentation without a PC. |
 |
Since two PC card
slots (PCMCIA TYPE II ATA specification) are
incorporated into the main unit, you can easily
make a presentation using still images, such
as JPEG files, by inserting a commercially available
PC card. It is optimum for immediately projecting
still images photographed with a digital camera.
Since there are two slots, you can use a PC
card and a wireless (wired) LAN card simultaneously. |
|
| USB memory device and USB memory card reader can
be used. |
Not only
the flash memory card but USB memory device
can be connected to project images stored in
USB memory or used as a protection key. Furthermore,
by connecting USB memory card reader, you can
manipulate the data on the memory cards or use
various kinds of memory cards as a protection
key.
For the
available USB memory device and USB memory card
reader, please refer to this. |
|
| By connecting a USB mouse (included in the standard
set), you can operate the projector in the same
way as a PC. |
| By connecting a USB
mouse (including in the standard set), you can
also operate 3D Reform function, the on-screen
menu with a mouse, and select an image recorded
on a PC card, as well. With the Chalkboard function,
you can draw lines or simple drawings on the
projected screen by using the USB mouse, so
that you can arrange your presentation more
attractively. (Compliant with USB standard Version
1.1)Since the functions are displayed with a
pull-down menu like Windows, projector operation
is similar to a PC. You can switch between the
Basic menu containing often-used functions and
the advanced menu for more detailed adjustments
and operation. Furthermore, you can display
customized menus. |
 |
|
| A high power 5W+5W stereo speakers are included. |
| Since the
output of the speakers is a powerful 5W+5W,
it is convenient when you use the projector
in a seminar room or a classroom. |
|
| Substantial input terminals |
| Substantial
input terminals, including DVI-D port and BNC
port, etc., are included. |
 |
|
| The multi functional presentation remote controller
with a built-in laser pointer is included. |
All basic operations
required during a presentation are concentrated
in the wireless remote controller. You can perform
the mouse operations of a PC as well as controlling
the projector. Signals from the remote controller
can be received in a 360-degree angle. Since
there are no limitations on where the presenter
stands, you can concentrate on your presentation.
* This product complies with Class 2 standards
for lasers (JIS C 6802:1998) |
 |
|
![]() |
| |
| Specifications |
|
LCD Panel |
1.0" (1024 x 768) p-Si LCD x 3 |
|
Lens |
Power Zoom / Focus |
|
Lamp |
275W (Normal Mode) / 220W (Eco Mode)
/ 160W (Long Life Lamp Mode) |
|
Image Size |
25-500" |
|
Light Output |
Normal Mode :2600 ANSI Lumens
Eco Mode : 2100 ANSI Lumens
Long Life Lamp Mode : 1600 ANSI Lumens
|
|
Synchronization Range |
Horizontal 15-100kHz (RGB : 24kHz
or over)
Vertical 48-120Hz (Non - interlaced)
|
|
Input Signals |
RGB (Analog) : VGA, SVGA, XGA, SXGA,
SXGA+, UXGA
RGB (Digital) : VGA, SVGA, XGA, SXGA(60Hz)
Video Component : NTSC, PAL, SECAM,
NTSC4.43, PAL-N, PAL-M, PAL-60
DTV 1080p, 1080i, 720p, 480p, 480i/60Hz
DTV 1080i/50Hz, Progressive PAL-scan/50Hz
DVD Component Video Signal (15kHz)
|
|
Terminals |
RGB Input : 1 BNC (R/G/B/H/V) with
Stereo-mini Audio
1 mini D-SUB 15 pin with Stereo-mini
Audio
1 DVI-D with Stereo-mini Audio
Video Input : 1 RCA with Stereo RCA
Audio
S-Video Input : 1 DIN 4pin with Stereo
RCA Audio
RGB Output : 1 mini D-SUB 15 pin with
Stereo-mini Audio
Wired Remote Input : 1 Stereo-mini
USB (PC) : B Type Remote Mouse Out
/ PC Control
USB (Mouse/HUB) :A Type Mouse Control
for PJ or USB Storage / USB HUB-Out
from PC (Selectable)
Audio Output : Stereo RCA (Variable
Output)
PC Control : D-SUB 9 pin (Male) Serial
Terminal
PC Card : 2 PCMCIA Slots for LAN and
Storage |
|
Speaker |
5W x 2 Stereo Speakers, with Volume,
Bass and Treble Control |
| Fan Noise |
<39dB (Normal
Mode) / <34dB (Eco Mode) / <29dB
(Long Life Lamp Mode) |
|
Power Requirement |
100-120V / 200-240V AC, 50Hz/60Hz
|
|
Power Consumption |
390W (Normal) / Stand-by Mode : Approx.
1W |
|
Dimensions (WxHxD) |
334 mm x 115 mm x 323 mm (Not including
protrusions) |
|
Net Weight |
5.9 Kg |
|
Technologies |
Long
Life Lamp Mode, Low Fan Noise, Advanced
Colour Management System,Full Function
360 degree Remote System, USB Mouse
Operation, Front Ventilation, PC Card
Viewer, 3 Mode On Screen Menu, Security
System |
|
|
| Options |
| Replacement Lamp (MT60LP) |
Extended Life Lamp (MT60LPS) |
Ceiling Mount Kit
(MT60CM) |
Component Video Cable |
 |
|
 |
 |
| |
| 1:2.7-4.2 Long Focus Zoom Lens(MT60-26ZL)
|
1:1 Short Focus Fixed Lens(MT60-10RL)
|
Brightness
(Average)
Lamp mode:Normal |
2700ANSI
lm(MT1065) |
Brightness
(Average)
Lamp mode:Normal |
2700ANSI
lm(MT1065) |
| 2500ANSI lm(MT1060) |
2500ANSI lm(MT1060) |
| 2700ANSI lm(MT860) |
2700ANSI lm(MT860) |
 |
 |
| Wireless LAN Card |
 |
Available Country or Area List |
| SWL-2100N-NU |
U.S.A, Canada |
| SWL-2100N-NE |
Spain, Portugal, Italy, U.K, Ireland,Iceland,
Germany,Switzerland,Austria, Liechtenstein,Belgium,
Netherlands, Luxembourg,Denmark, Sweden,Norway,
Finland, Greece, SouthAfrica, Hongkong,
Malaysia,Australia |
| SWL-2100N-NF |
France |
|
|
|
Model codes,
specifications and available options may differ by region.
For detailed information, please contact the NEC sales
company or dealer in your area.
XGA is a registered trademark
of International Business Machines Corporation. All
other brand and product names are registered trademarks
of their respective holders. Further trademark information. |
| | | |
|
